I normally will overshoot on voltage I need to insure I can get a quick stable overclock. When it comes to dialing in voltage I tend to do it a certain way.
#MSI Z97 GAMING 7 VOLTAGES 1080P#
Or do you think i should experiment and lower the voltage a bit while keeping 4.5 GHz, specially considering the very low voltage my CPU originally came from the factory with?ĬPU:i7-2600K 4751MHz 1.44V (software) -> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1 Should i set 4.4 GHz at 1.95v or change some of the settings? (like the override mode) I know that stress tests like this are pretty rare in a real world usage of a CPU (on idle my chip stays around 33-35° Celsius), but quite some times i render 3D stuff, so it might happen quite frequently to have a high utilisation for 1-2 hours straight. I have a single slot radiator liquid cooling system from corsair, and after 1 hour of AIDA64 at 100% usage i get a max value of 91° Celsius (196 F°), with an average temperature just before stopping the test at around 86° Celsius (187 F°). I'm only worried about one thing, temperatures.
The system is smooth, no crashes upon intense stress tests and performance are better. Memory Overclock (X.M.P profile 1, which basically set the settings automatically to reach 2133 mhz) Core voltage: 1200 (1.2 v) (The original voltage of my chip was around 0.95) Overclock Mode: Fixed (same for all the cores) Upon following some guides, and the advice of some friends, i managed to overclock with CPU to these settings: I mostly use my computer for work (2D and 3D animation), so i want to get the most performance from my CPU as possible.Īfter 3.5 years owning my i7 4790k i finally decided to overclock it from 4 to 4.5 GHz.
i am trying to get the default xmp of 1866 Mhz to work but ultimately i would like to overclock my ram to 2400-2133 Mhz which should be doable. I have 16 gb corsair vengence pro 1866 cl9 with has inbuilt xmp 1866 but when i enable xmp trough click 4 bios it says on boot up overclocking failure valus reset and it resets DRAM frequency do default 1333Mhz i was able to set the frequency manually to 1600 Mhz with xmp enabled ( without xmp enabled cpu-z show that it clocks back to default 1333Mhz) but not over that ( the same boot up failur occurs over 1600mhz as with the xmp enabled and frequency set to auto) my mobo supports up to 3300 Mhz overclock and my cpu is i7 4790k ( running on default clock) so that shouldn't be a problem, i havent messed around with volts because the xmp should take care of it on its own. Hello i have a problem overclocking my DRAM on my msi gaming 7 z97 mobo
0 kommentar(er)
